8″ HiTemp 75°C Motors
These 8″ encapsulated motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 8″ diameter or larger water wells with ambient temperatures up to 75 °C.
It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES92 fluid, providing frost protection down to -15 °C storage temperature.
A special diaphragm ensures pressure compensation inside the motor. The Sandfighter® SiC seal system is standard.
Brochure and Leaflet
Manual
Specifications
- Up to max. 90 °C ambient temperature
- 45 kN thrust bearing capacitiy is standard in 22kW and 30kW motors
- Increased thrust capacity up to 30 °C
- No cooling flow in larger wells (12″ / open reservoirs) up to 30 °C ambient
- Hermetically sealed encapsulated stator, anti track, self healing stator resin
- Removable “Water Bloc” lead connector
- Sandfighter® motor with SiC-mechanical seal
- High efficiency electrical design for low operation cost
- Standard Motor: WW- Water well Design (Stator 304SS / Castings – CI Powder coated)
- All motors prefilled and 100 % tested. Max. storage temperature -15 °C – + 60 °C
- High temperature leads
- Non contaminating FES92 -filled design
Technical Specification
- 3.7 – 30 kW
- 6″ NEMA double flange
- Protection: IP 68
- Starts per hour: max. 20
- Installation: vertical/horizontal
- Standard Voltage: 380-415 V/50 Hz, 460 V/60 Hz
- Voltage tolerance 50 Hz: -10 % / +6 % UN [380-415 V = (380-10 %) – (415+6 %)]
- Voltage tolerance 60 Hz: ±10 % UN
- Motor protection: Select thermal overloads according to DIN 60947-4-1, trip class 10 or 10 A, trip time < 10 s at 5 x IN
- Insulation: Class F
- Rated ambient temperature: max. 90 °C
- Cooling flow: min. 0.16 m/s
- DOL / YΔ – start (pos. of cables 90°)
- Motor cable in standard with 5m length 3X8,4mm², and 5m single wire round – ground lead mounted on the motor
Options
- Other voltages
- Motors complete in 316 SS
- 45kN Thrust Bearing capacity
- PT 100 temperature sensor (sold separately)
- Motor lead in 5 m or 8 m length